NEC NP4001 User Manual Download

Page: 108 / 151

5. Using On-Screen Display

Information Menu Descriptions and Functions

The information menu provides only screens to access details quickly. The Information menu
contains four distinct tabs.

Usage Time

The Usage Time tab displays information about lamp usage and remaining lamp life.

The following table lists all items with a description.

TEM

ESCRIPTION

Lamp1 Life
Remaining

Displays the Lamp1 life remaining as a percentage.

Lamp2 Life
Remaining

Displays the Lamp2 life remaining as a percentage.

Lamp1 Hours
Used

Displays the Lamp1 total usage in hours.

Lamp2 Hours
Used

Displays the Lamp2 total usage in hours.

Filter Hours
Used

Displays the filter total usage in hours.

Downloaded From projector-manual.com NEC Manuals

Summary of Contents for NP4001
























































































































































Search results

Summary of Contents for NP4001

Reviews:

Related manuals for NP4001

Brands by name

Popular brands

NEC NP4001, User Manual

Search results

Summary of Contents for NP4001

Reviews:

Related manuals for NP4001

Brands by name

Popular brands