NEC NP300 Series User Manual Download

Page: 82 / 109

5. Using On-Screen Menu

Menu Descriptions & Functions [INFO.]

Displays the status of the current signal and lamp usage. This item has four pages. The information included is as
follows:

TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.

[USAGE TIME]

[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)

* The progress indicator shows the percentage of remaining bulb life.

The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE
REMAINING bar indicator changes from 0% to 100 Hours and starts counting down.

If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the LAMP MODE
is set to NORMAL or ECO.

• The message to the effect that the lamp or the filters should be replaced will be displayed for one minute when

the projector is turned on and when the POWER button on the projector or the remote control is pressed.

To dismiss this message, press any button on the projector or the remote control.

Lamp lfe(H)

Replacement lamp

NORMAL

ECO

3000

4000

NP07LP

Summary of Contents for NP300 Series














































































































Search results

Summary of Contents for NP300 Series

Reviews:

Related manuals for NP300 Series

Brands by name

Popular brands

NEC NP300 Series, User Manual

Search results

Summary of Contents for NP300 Series

Reviews:

Related manuals for NP300 Series

Brands by name

Popular brands