33
3. Projecting an Image (Basic Operation)
Using the Laser Pointer
You can use the laser to draw your audience’s attention to a red dot that you can place on any object.
CAUTION:
• Do not look into the laser pointer while it is on.
• Do not point the laser beam at a person.
• Do not allow children to use the laser pointer.
Press and hold the LASER button to activate the laser pointer.
LASER
LAS
ER
LAM
P
STAT
US
POW
ER
ON/S
TAND
.BY
SOUR
CE
AUTO
.ADJU
ST
3D.R
EFO
RM
SELEC
T
USB
LENS S
HIFT
LEFT
RIGHT
DOWN
UP
W
IR
E
L
E
S
S
W
IR
E
L
E
S
S
Setting the function switch
There are two switches on the bottom of the battery case: an applicable projector selector switch (1) and laser en-
able/disable switch (2). Check the projector being used and decide whether to enable or disable laser, then set
these switches as necessary using the tip of a thin ball-point pen. On this model, an applicable projector selector
switch (1) is not used.
ON
OFF
Switch (2)
ON.......................... Enabled.(the.laser.lights.when.the.LASER.button.is.pressed).[Factory.default]
OFF......................... Disabled.(the.laser.does.not.light.even.when.the.LASER.button.is.pressed)
Disable the laser when using in an environment in which the unit is accessible to children.
