19
2. Projecting an Image (Basic Operation)
❹
Selecting a Source
Selecting the computer or video source
NOTE:
• Turn on the computer or video source equipment connected to the projector.
Using the Direct button
Press the Direct button on the projector cabinet or remote control.
Select the input according to the connection terminal.
Input connector
Button on the projector
cabinet
Button on the remote
control
Note
HDMI1/2 IN
HDMI 1/2
HDMI
Switches between HDMI1 and HDMI2 each time
it is pressed.
DisplayPort 1/2 IN
DisplayPort 1/2
DisplayPort
• Switches between DisplayPort1 and DisplayPort2
each time it is pressed.
• Select DisplayPort1 for dual link.
SDI 1/2/3/4 IN
SDI
AUX
• Switches between SDI1, SDI2, SDI3 and SDI4
each time it is pressed.
• Select SDI1 for quad link or dual link.
HDBaseT
HDBaseT/SLOT
NETWORK
Each time the button of the projector cabinet is
pressed, the mode switches between HDBaseT
and SLOT.
SLOT
HDBaseT/SLOT
SLOT
Each time the button of the projector cabinet is
pressed, the mode switches between HDBaseT
and SLOT.