147
6. Installation and Connections
Connecting Your DVD Player or Other AV Equipment
Connecting Video/S-Video Input
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
SOURCE button on the projector
cabinet
Button on the remote control
VIDEO IN
VIDEO
VIDEO
S-VIDEO IN
S-VIDEO
S-VIDEO
NOTE: The AUDIO IN L and R jacks (RCA) are shared between the Video and S-Video inputs.
NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements.
NOTE:
• An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan
converter.
• Video signals can be projected when a video cable (commercially available) is connected to the Computer 3 video input connector’s
G/Y connector.
In this case, set the on-screen menu’s SETUP
→
OPTION(1)
→
SIGNAL SELECT(COMP3) to [VIDEO] and select Computer 3 for
the input selection.
Audio cable (not supplied)
S-Video cable (not supplied)
Video cable (not supplied)
Audio equipment
Audio cable (not supplied)
