98
5. Using On-Screen Menu
[VIDEO]
Using Noise Reduction [NOISE REDUCTION]
This function is used to reduce video noise.
RANDOM NR ��������� Reduces flickering random noise in an image�
MOSQUITO NR ������ Reduces mosquito noise that appears around the edges of an image during DVD playback�
BLOCK NR ������������� Reduces block noise or mosaic-like patterns by selecting ON�
Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE]
This function allows you to select an interlaced-to-progressive conversion process for video signals.
AUTO ��������������������� Determines an appropriate interlaced-to-progressive conversion process automatically�
VIDEO �������������������� Applies a normal interlaced-to-progressive conversion process�
FILM ���������������������� Applies the automatic detection mode for telecine signals� This option is recommended for a movie pic-
ture�
NOTE: This function is not available with RGB signals.
Turning On or Off the 3D Dimensional Separation [3D Y/C SEPARATION]
When projecting an image from a VIDEO input, set to ON to project the highest quality image.
OFF ������������������������ Turns off the 3 dimensional separation feature�
ON ������������������������� Turns on the 3 dimensional separation feature�
NOTE: Only available for NTSC 3.58 video signals.
[DETAIL ENHANCEMENT]
This function enhances the contours of the image when projecting component signals.
[SIGNAL TYPE]
The projector automatically identifies whether the COMPUTER 1, COMPUTER 2 or COMPUTER 3* input signals are
RGB or component signals to project the image. If the colors are unnatural, however, try switching the setting.
* For COMPUTER 3, the computer signal and video signal can be selected at SIGNAL SELECT(COMP3).
RGB ����������������������� Switches to the RGB input�
COMPONENT ��������� Switches to the component signal input�
