59
2. Configuring the projector’s initial settings
2-3. Installing the LV unit
Mount the LV unit on the projector unit.
NOTE:
• The projector cannot be used alone. Be sure to mount the LV unit before using the projector.
• Before mounting, be sure to turn off the projector’s power, disconnect the AC power and unplug the power cord.
Preparation:
• Prepare a Phillips screwdriver.
• Remove the side panel. (
→
)
1. Remove slot blocking panel A.
(1) Loosen the blocking panel A screws (2) until they turn freely.
The screws do not come off.
Blocking panel A
(2) Remove blocking panel A.
2. Remove slot blocking panel B.
(1) Loosen the blocking panel B screws
(3) located inside the slot until they turn
freely.
The screws do not come off.
Blocking panel B
Blocking panel B