15
... English
Installation
Powering Off the Projector
1. Press the
“
POWER
”
button on the remote control or the
button on the control panel to turn off the projector, you will
see a message as below on the on-screen display.
2.
Press the “POWER” button again to confirm.
When the light
turns red, the projector has entered standby mode.
3. Disconnect the power cord from the electrical outlet and the
projector.
4. Do not turn on the projector immediately following a power
off procedure.
After Use
When storing the projector in the supplied soft case, insert
the projector with the top cabinet facing upward.
The remote control can be stored in the inner pocket inside
the soft case.
Lens cover
In some cases the
POWER indicator can
stay light for a certain
period of
time after the power
cord is unplugged.
This is not a fault. Press
the POWER button
again with the power
cord unplugged and
the indicator light will
go off.
