NEAX2400 IPX Feature Programming Manual
Page 910
NDA-24297, Issue 1
D-93D
Dual Hold D
term
- CCIS
D-93D Dual
Hold
D
term
- CCIS
General Description
This feature allows two connected D
term
s to simultaneously be placed on non-exclusive hold over a CCIS link. This
enables the held parties to answer or originate a call from a sub-line appearance or the idle Prime Line.
Operating Procedure
To place a call
1.
When two D
term
s are connected via CCIS, either D
term
user can press the HOLD button and place the other
D
term
on NON-EXCLUSIVE HOLD-D
term
[N-7D].
2.
If the held D
term
user wishes to originate or answer another call from a multi-line appearance, the held
D
term
presses the HOLD button and places the CCIS connection in a DUAL HOLD condition.
To answer a call
1.
The D
term
user goes off hook and presses the held line. If MUSIC ON HOLD [M-7] is heard (if provided),
the other D
term
has placed the connection on hold. MUSIC ON HOLD [M-7] will be heard until the
connected D
term
presses the held line and enters the call.
Service Conditions
1.
While the call is in DUAL HOLD, AUTOMATIC RECALL-D
term
[A-8D] will be initiated after the time-
out.
2.
DUAL HOLD - CCIS cannot be activated for calls established by:
BUSY VERIFICATION - CCIS
[B-9]
ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS [A-45]
EXECUTIVE RIGHT-OF-WAY - CCIS
[E-8]
Programming
ASYD
- System Data 1, Index 144. Recall timer for NON-EXCLUSIVE HOLD. Assign data 00H for
30 seconds. ROM default is 3FH.
System Data 2, Index 12, Bit 0. Is Automatic Recall Ringing provided on a per-tenant basis? 0/1: Yes/
No.
