NEAX2400 IPX Feature Programming Manual
Page 686
NDA-24297, Issue 1
S-12
Station-to-Station Calling - Operator Assistance
S-12 Station-to-Station Calling - Operator Assistance
General Description
This feature allows a user to call another station within the PBX, with the assistance of the ATTENDANT
CONSOLE [A-3] operator.
Operating Procedure
1.
Lift the handset; receive dial tone.
2.
Dial the operator access code (normally “0”).
3.
Relay the desired telephone number to the Attendant.
4.
The Attendant dials the telephone number.
5.
Calling and called parties are connected when the Attendant presses the RELEASE key.
Service Conditions
1.
The Attendant may drop out of the connection before or after the called party has answered.
2.
If the called station does not answer within 30 seconds, AUTOMATIC RECALL [A-8] will be activated.
The Recall Timer length is set in system data.
3.
Using this feature, the Attendant may connect the calling party to a fully-restricted station.
4.
STATION-TO-STATION CALLING-OPERATOR ASSISTANCE between TENANTs [T-2] will not be
restricted, unless such a restriction is programmed in system data.
5.
The Fusion Point Code of the node which accommodates the called Attendant Console must be assigned
after system data assignment.
Interactions
1.
The ATNR command is required for all station-to-station calling.
2.
The normal 5 dB PAD loss inserted for station-to-station calling may be eliminated on a per-station basis.
For these stations, assign a Service Feature Class that allows SFI 50, Removal of 5dB pad for Off-Premises
Extensions (OPX).
3.
The Attendant Console must first be provided.
4.
ATTENDANT CAMP-ON WITH TONE INDICATION [A-1]: The Attendant cannot camp-on a station-
to-station call.
Programming
STEP 1:
ASYD
- System Data 1, Index 4, bits 2 & 3. Assign data “10” for First-Party Release.
STEP 2:
ATNR
- Assign for Tenant Restriction Index (TRI) 0. This index allows for STATION-TO-STATION
CALLING between the same tenant and between different tenants. The tenant, in which the Attendant
resides, must also be allowed STATION-TO-STATION CALLING to assist in placing the call.
DAY/NIGHT: Day/Night Mode
D:
Day Mode
N:
Night Mode
OGTN:
Originating Tenant
TMTN:
Terminating Tenant
