NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 543
Non-delay Operation
N-3
N-3 Non-delay
Operation
General Description
This feature allows the ATTENDANT CONSOLE [A-3] to place any calling party on hold, dialing the call, and
connecting the calling and called parties.
Operating Procedure
1.
The Attendant answers an operator call by pressing the ANSWER or ATND key.
2.
Press the START key.
3.
Dial the exchange network access code.
4.
Dial the desired telephone number.
5.
Press the RELEASE key.
6.
The parties are connected.
Service Conditions
1.
The Attendant may terminate the connection either before or after the called station answers.
2.
There is no AUTOMATIC RECALL [A-8] for station-to-trunk and trunk-to-trunk calls when the called
party does not answer.
3.
If the station is restricted, the Attendant will receive a reorder tone when attempting to establish a Central
Office connection.
4.
When the PASSING DIAL TONE [P-2] feature is provided, and the Attendant has accessed an outgoing
trunk, the call may be released from the ATTENDANT CONSOLE [A-3], and the user is allowed to
complete dialing.
5.
This feature allows the Attendant to place an outgoing call for a user who reached the Attendant via a dial
“0” call without requiring the user to hang up.
6.
The Attendant can dial the called number for the user, or using the PASSING DIAL TONE [P-2] feature,
allow the user to complete the dialing.
7.
A call can be transferred to a trunk in the remote node via FCCS link.
Interactions
1.
The Attendant Console can seize the dial tone and dial an outgoing number for any station in the system.
The Attendant Console cannot pass an unrestricted dial tone to any station. See PASSING DIAL TONE
for more information.
2.
The Attendant Console must first be provided.
Programming
STEP 1:
ARSC
- Construct a Route Restriction Class (RSC) that will allow outgoing access to various routes
using the Route Restriction Index (RRI) 2 through the Attendant Console.
STEP 2:
ASDT
- Assign a Route Restriction Class (RSC) that allows outgoing access to the various routes via
the Attendant Console to the station.
