NEAX2400 IPX Feature Programming Manual
Page 340
NDA-24297, Issue 1
E-4D
Exclusive Hold - D
term
E-4D
Exclusive Hold - D
term
General Description
This service feature allows a user to place a call on hold and to exclude all other users from retrieving the held call.
Operating Procedure
While a call is in progress
1.
Press the HOLD key twice; the LCD displays:
Held Station or Trunk
2.
To return to the held call, press the held line key; the conversation is reestablished.
Service Conditions
1.
EXCLUSIVE HOLD - D
term
may be activated from any line appearing on a D
term
.
2.
After EXCLUSIVE HOLD has been set, the user can make or answer calls from any other line appearing
on the D
term
.
3.
Only the D
term
that sets EXCLUSIVE HOLD may retrieve the held call.
4.
After a variable programmable period of time, the held call will enter AUTOMATIC RECALL [A-8]
regardless of the status of the D
term
. Ringing, however, is disabled while DO NOT DISTURB - D
term
[D-
11D] is activated.
5.
The LCD of other D
term
stations on which the held line appears will be lit steadily.
6.
Two-Party Hold is not available when a D
term
is engaged in a 3-party conference with a station and/or
trunk.
7.
The held station is denied the following services:
ATTENDANT CAMP-ON WITH TONE INDICATION
[A-1]
ATTENDANT OVERRIDE
[A-7]
BOSS-SECRETARY OVERRIDE - D
term
[B-5D]
BUSY VERIFICATION
[B-3, B-9]
CALL WAITING - ORIGINATING
[C-31]
CALL WAITING - TERMINATING
[C-12]
EXECUTIVE RIGHT-OF-WAY
[E-1, E-1D]
Programming
ASYD
- System Data 1, Index 144. Automatic Recall Timer for D
term
hold. Assign as data 00H for
default value of 30 seconds.
System Data 2, Index 12, Bit 1: Automatic Recall Ringer for Exclusive Hold.
0/1 = Recall/No Recall
E_HOLD
XXXX
(Time Display)
