NEAX2400 IPX Feature Programming Manual
Page 336
NDA-24297, Issue 1
E-1D
Executive Right-of-Way - D
term
E-1D
Executive Right-of-Way - D
term
General Description
This feature enables selected D
term
users, upon encountering a busy condition at an internal station, to bridge into
the busy connection after transmitting a warning tone.
Operating Procedure
To enter a busy connection from a D
term
1.
Dial the busy station; receive busy tone.
2.
Press the EXECUTIVE RIGHT-OF-WAY OVER key; the associated LED lights and warning tone is sent.
3.
The calling station is bridged into a THREE-WAY CALLING [T-2]; the LCD displays:
Interrupted Party Called Party
The LCD then displays:
Service Conditions
1.
Two burst tones (.08 second) are transmitted upon activation of this feature to alert the connected parties
that an EXECUTIVE RIGHT-OF-WAY call has been bridged into the connection.
2.
The LCD display on the interrupted party's D
term
will give an indication only if INTERMEDIATE
STATION NUMBER DISPLAY - D
term
[I-10D] has been programmed in system data.
3.
EXECUTIVE RIGHT-OF-WAY is denied if the busy station is:
a.) dialing or in a LINE LOCKOUT [L-3] state
b.) receiving a tone
c.) being rung
d.) protected from override via CLASS OF SERVICE - INDIVIDUAL [C-15]
e.) being connected to an Attendant loop
f.) activating a conflicting feature, such as:
ATTENDANT CAMP-ON WITH TONE INDICATION
[A-1]
ATTENDANT OVERRIDE
[A-7]
BOSS - SECRETARY OVERRIDE
[B-5D]
BUSY VERIFICATION
[B-3, B-9]
CALL HOLD
[C-6, C-6D]
CALL TRANSFER
[C-10,C-11,C-50, C-54]
CALL WAITING - ORIGINATING
[C-31]
CALL WAITING - TERMINATING
[C-12]
CONSULTATION HOLD - ALL CALLS
[C-17, C-58]
DATA LINE SECURITY
[D-12, D-66]
DATA PRIVACY ON DEMAND
[D-17, D-68]
DIAL ACCESS TO ATTENDANT
[D-2, D-71]
OVERRIDE XXXX
XXXX
(Time Display)
CONF
(Time Display)
