NEC NEAX2400 ICS, Programming Manual, Page: 237 / 1089

NEAX2400 IPX Feature Programming Manual
Page 194
NDA-24297, Issue 1
C-22D Called Station Status Display - D
term
C-22D Called Station Status Display - D
term
General Description
This feature provides for the status of a called station to appear on the LCD display of a calling D
term
.
Operating Procedure
Lift handset or press SPEAKER key; dial desired station. The LCD display indicates the status of the called station.
Service Conditions
1. If the called station is idle, the display flashes its number until the call is answered. If the called station is
busy, the LCD displays:
Called Station
2. If the called station is in DO NOT DISTURB - D
term
[D-11D], the LCD displays:
Called Station
3. If the calling station encounters a restricted station, the LCD displays:
Called Station
4. CALLED STATION STATUS DISPLAY - D
term
can be restricted on a system-wide basis. The LCD
displays:
Programming
ASYD
- System Data 1, Index 78, Bit 1. Is the Service Feature Display in service? 0/1: No/Yes.
FCCS Programming
No unique programming is required for the FCCS network.
BUSY XXXX
(Time Display)
REST XXXX
(Time Display)
REST XXXX
(Time Display)
(Time Display)
XXXX