NEAX2400 IPX Feature Programming Manual
Page 1016
NDA-24297, Issue 1
S-55
Single-Digit Station Calling - CCIS
S-55
Single-Digit Station Calling - CCIS
General Description
This feature allows single-digit station numbers to be assigned.
Operating Procedure
1.
Lift the handset; receive dial tone,
2.
Dial the single-digit station code,
3.
The called station will ring.
Service Conditions
1.
The single-digit number must not duplicate the first digit of:
a.) Trunk Access Codes
b.) Feature Access Codes
c.) Other Telephone Numbers
2.
Timing Start is not available with this feature.
Interactions
1.
An entire number level is eliminated for each station with one-digit access. Do not plan to have more than
one or two such phones in a system.
2.
The Attendant Console Busy Lamp Field (BLF) is not available for this feature.
Programming
STEP 1:
ASYD
- System Data 1, Index 16, Bit 0. Assign this Bit as data “1”, enabling station numbers.
STEP 2:
ANPD
- Reserve a number level for station access. Assign an NND = 1, and BLF is 0.
STEP 3:
ASPA
- For the desired station number assign SRV = STN (Station), NND is not required. Assign
Connection Index (CI) of Normal (N), Hooking (H), and Busy (B).
STEP 4:
ASDT
- Assign the station number to a specific station within the system.
