Chapter 3 Terminals
SN716 DESKCON
NEAX2000 IVS
2
General Description
NDA-24293, Issue 2
Page 31
SN716 DESKCON
The SN716 Desk Console has an ergonomic design and provides full access to all
PBX Console features. It connects to the NEAX2000 IVS
2
using the same circuit
cards as the D
term
Series E and Series III terminals. The SN716 Desk Console has
ATT Interface (ATI) to connect to the PBX. This interface is 6-core Modular Jack;
inner 1 pair for signal and outer 2 pairs are for power supply.
The SN716 Desk Console operates on a switched-loop basis with a maximum of 6
Attendant loops terminating at each console on the associated Interface card. The
Attendant uses these loops for answering, originating, holding, extending, and
reentering calls. When Attendant loop release is used, the number of loops is
effectively increased to a maximum of 12 for each console.
The NEAX2000 IVS
2
supports a maximum of eight SN716 DESK Consoles.
Figure 3-17 SN716 DESKCON
