ND-70348 (E)
CHAPTER 4
Page 284
Revision 3.0
ALDNN
ALDNN: Assignment of Listed Directory Number for NDM
1. General
This command is used to assign the Listed Directory Number (LDN) which allows a Direct Inward Dialing
(DID) call to terminate to Attendant Consoles within the Fusion Network. The data assigned by this command
is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each
Local Node (LN).
2. Precautions
1.
When the LDN number assigned by this command is dialed from PSTN, the call terminates to Attendant
Consoles during the Day mode, and redirects to a station or outside party in the Night mode. Any
ATTCON or station within the Fusion Network can be designated as the destination the call to be termi-
nated.
2.
The numbering of the LDN assigned by this command must conform to the numbering plan data. (The
ANPDN command and the ASPAN command (SRV = TELN))
3.
This command is available since Release 9 software enhancement.
3. Data Entry Instructions
a.) TYPE = 0 (No Night Transfer) is selected;
0 = No Night Transfer
1 = TELN
2 = To Outside
3 = ADC
Enter desired DID number to terminate the call to
Attendant Console in Day mode.
USER
GROUP
NUMBER
OF LDN
(L-UGN)
FUSION
POINT CODE
(FPC)
1-253
TENANT
NUMBER
(TN)
TELEPHONE NUMBER OF
LISTED DIRECTORY NUMBER
(L-TELN)
MAX. 16 DIGITS
L-TELN
Enter the FPC of the Node accommodating the
Attendant Console to which DID call to be
terminated.
FPC
TYPE
TYPE
REMARKS
0
