NEC NEAX 2400 IPX, Programming Manual

Page: 65 / 316

NDA-24305 CHAPTER 5
Page 47
Revision 1.0
CALL PICKUP-GROUP-PRI
C-97 CALL PICKUP-GROUP-PRI
1. General Description
This feature permits a station user to answer ISDN Network calls directed to other lines in a preset CALL
PICKUP-GROUP simply by dialing a pickup code.
2. Operating Procedure
Picking up an incoming ISDN call:
1. A call from the ISDN network terminates to a trunk.
2. Stations within the same CALL PICKUP-GROUP-PRI ring.
3. Lifts the handset; receives Dial Tone.
4. Dials the call pickup code; the call is connected to the station.
Picking up an incoming call (Consultation Hold):
1. A call from the ISDN network terminates to a trunk.
2. The station within the same CALL PICKUP-GROUP-PRI ring.
3. The station flashes the switchhook; receives special Dial Tone.
4. Dials the call pickup code; the call is connected to the station.
5. The first party is put on CALL HOLD [C-6] status.
3. Programming
STEP 1: ANPD - Reserve a number level for feature access and cancel. Assign Connection Index, CI=N, H;
Normal, Hooking. Assign NND in accordance with a predetermined numbering plan.
STEP 2: ASPA - Assign an access code for the CALL PICKUP GROUP, SID = 7 for Connection Status
Index (CI) of Normal and Hooking.
STEP 3: ACPG - Assign members of CALL PICKUP GROUP. If two stations are ringing simultaneously,
the station that was programmed first will be picked up first.
Note: Maximum 100 stations per group.
•
No limit to the number of Groups per system.
• Stations must belong to the same tenant.