Built-In AIT Auto-Loader Unit 11
Handling
The following explains how to handle the N8551-29F Built-In AIT Auto-Loader Unit.
Setting the AIT data cartridge
Important
• As the data cartridge to be set in the magazine, use our “AIT Data Cartridge”. If you use a data
cartridge of other manufacturer, a read/write error may occur.
• Set four AIT cartridges in the magazine. If setting the magazine in which only three or less
cartridges are contained, a machine failure or damage of backup data may be caused.
• The AIT data cartridges set in the magazine are assigned numbers as below. Do not set them
in the wrong order.
3
2
4
1
Check
✔
When write-protect is enabled using the AIT data cartridge write-protect plug so that you cannot
write data in the data cartridge, the write-protect indicator lights after the magazine is set in the
driver.
Write-protect plug (Sliding it up write-
protects the cartridge.)
(
→
31 page)
WP lights.
Cartridge 4
Cartridge 1
Cartridge 3
Cartridge 2
Summary of Contents for N8551-29F
Page 46: ......
