NEC N8105-65, User Manual

Page: 48 / 51

E- 21
4.
Trouble Shooting
4.1.
Unable to Start the System
Check the adapter installation
□
Make sure the adapter is mounted proper slot
Check the slot is conformed to mount the adapter. Refer to the User’s Guide of the server.
If the adapter in not seat proper slot, Seat the adapter to proper slot.
□ Make sure the adapter is connected to PCI-Express ® slot firmly
Check the adapter is connected firmly. If it is not so , Re-install the adapter
Check the screw(or clip) on the server for bracket fixing is not loose
□
Make sure that the auxiliary power connector is connected
This product requires power from the PCI-Express® connector and power from the main unit through the
auxiliary power connector. Refer to the system configuration guide of the server, etc., and confirm that it
is installed in the installable slot of this product.
Make sure that “K410-477 (00) Graphics Card Power Cable (8Pin. B Type)” is connected.
□
Make sure equipment on the Server has no failures.
Make sure that the PCI-Express® slot does not broke, or foreign substance has not entered.
If it is so, Please contact to reseller, sales agents or service representative
□
Verify that your server is using the Latest BIOS
Check the version of the system BIOS.
If the version is not proper, Update the system BIOS to latest version.
Check the adapter
□ Make sure the adapter is not broken
Check the component on the adapter.
If it has broken, Please contact to reseller, sales agents or service representative
□
Make sure the adapter has not entered foreign substance
Check the component on the adapter.
If it has foreign substance, Please contact to reseller, sales agents or service representative
□ Make sure a foreign substance has adhered to the connector of a board.
Check the PCI-Express® connector on the adapter.
If a foreign substance has adhered to the PCI-Express® connector, wipe off with soft cloth etc.
If the problem persists even after you checked the above items, something may be wrong with
this adapter.
Please contact to reseller, sales agents or service representative.
EU Contact:
NEC Nederland B.V.
Olympia 4, 1213 NT Hilversum, The Netherlands