NEC N8104-221, User Manual

Page: 62 / 66

E- 28
7.2. Network Cables
N8104-185/186/187/211/212
A “N8104-189 SFP+ module (10G-SR)” has an optical fiber interface based on IEEE802.3ae 10Gigabit
Ethernet® standard. The 10GbE SR standard enables 10GbE and full duplex transmissions at distances
up to 300 meters using standard multi-mode fiber (MMF, 850nm wave length) cabling.
Supported MMF cable listed below:
Connector type: LC
core/clad diameter Modal bandwidth Type Cable length
50/125μm 400MHz*km OM-2
2
～
66 m
500MHz*km OM-2
2
～
82 m
2000MHz*km OM-3
2 ～ 300 m
62.5/125μm 160MHz*km OM-1
2
～
26 m
200MHz*km OM-1
2
～
33 m
OM: Optical Multimode
Notes : N8104-187/211/212 also supports 25GBASE-SR.
About DA cable (Direct Attach; Twin-Ax)
The following is a list of 3rd party cables that have received some testing.
Brand Parts Number Length Brand Parts Number Length
NEC K410-203(03) 3m Juniper EX-SFP-10GE-DAC-3M 3m
Amphenol 617230010
617230006
617230002
571540002 5m
3m
1m
3m Cisco SFP-H10GB-CU3M
SFP-H10GB-CU5M 3m
5m
Arista CAB-SFP-SFP-3M 3m
TE Connectivity
2032237-6
2032237-4
2032237-2 5m
3m
1m
IBM
(BLADE Network
Technologies)
BN-SP-CBL-3M
BN-SP-CBL-1M
3m
1m
HPE 487649-B21
487652-B21
487655-B21
537963-B21 0.5m
1m
3m
5m HPE J9281B
J9283B
JD095C
JD096C
JD097C
JG081C 1m
3m
0.65m
1.2m
3m
5m
NOTE: Recommended length of DA cable: Up to 5 meters.