- 10 -
2022 April(1
st
Edition)
Notice
This section describes notice of installing. Read the following notes or information before installing.
4.1. About the operation by remote desktop
To operation that has been described to this document, Sign in to the system from a local console using an
administrator account.
Remotely changing the settings by using the operating system’s remote desktop feature is not supported.
4.2. About the Windows logs
The following log may be registered.
This error does not affect system operation.
Source
bnxtnd
Level
Warning
Timing
When installing an OS, when applying the LAN driver, or when running an OS after already
installing the LAN driver.
Event ID
2
Explanation
xxxxx Adapter : The network link is down. Check to make sure the network cable is properly
connected.
* "x" depends on the system environment.
Source
bnxtnd
Level
Error
Timing
When changing the link speed setting with the LAN cable and switching hub not connected, or
when you restart the system in the state after changing the settings
Event ID
23
Explanation
xxxxx Adapter : Firmware returned failure status.
* "x" depends on the system environment.
Source
bnxtnd
Level
Warning
Timing
When changing the link speed setting with the LAN cable and switching hub not connected, or
when you restart the system in the state after changing the settings
Event ID
26
Explanation
xxxxx Adapter : Adapter Incompatible speed selection between Port 1 and Port 2. Reported link
speeds are correct and might not match Speed and Duplex setting.
* "x" depends on the system environment.
