![NEC N8104-211 User Manual Download Page 47](http://html1.mh-extra.com/html/nec/n8104-211/n8104-211_user-manual_3859686047.webp)
E-17
2.1.
Bracket Replacement
Depending on the type of system, installation of this product requires either a standard bracket or a low-profile
bracket. NEC provides both of these brackets with the product. By default Full Height bracket is attached. Please
replace the bracket according to the following steps as necessary.
1.
Remove screw on this product with a screw driver.
2.
Remove the attached bracket and install the other bracket. Please keep the removed bracket.
3.
Attach the bracket with the bracket fixing screw.
NOTE:
When attaching / detaching the bracket, move the bracket in the direction shown in the following figure.
N8104-185
Detach
Attach
N8104-186
Detach
Attach
N8104-187
Detach
Attach
N8104-211
Detach
Attach
N8104-212
Detach
Attach
Summary of Contents for N8104-211
