NEC Display Solutions of America, Inc.
V323-2 Installation Guide
32” LCD Display
Rev 1.0
www.necdisplay.com
V323-2
Page 1 of 9
Contents
Product Description and Notes
Page 1
Tilt
Angle
and
Rotation
Page 1
Ventilation Recommendations
Page 2
Display Dimensions
Front, Top, Left, Right, Bottom
Page 3
Rear
Page 4
Optional Wall Mount Dimensions (WMK-3255S)
Page 5
Optional Wall Mount Dimensions (WMK-3257)
Page 6
Table
Top
Stand
Dimensions
Page
7
Input
Panel
Page 8
Control Codes
Page 8
Cable
Connection
Page 9
Product Description
Type:
LCD Display
Screen Surface:
Anti-Reflective
Resolution:
1366 x 768
Dimensions without stand: 29.5”(W) x 17.5”(H) x 2.4”(D)
Aspect
Ratio:
16:9
Dimensions
with stand:
29.5”(w) X 19.6”(h) X 6.8”(D)
FCC:
Class A
Weight without stand:
20.9 lbs
Power Consumption:
65W (max brightness/speaker active)
Weight with stand:
23.8 lbs
BTU’s:
221.79
BTU/hour
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
