NEC MultiSync LT280 User Manual Download Page 117

Page: 117 / 133

107

8. Appendix

��

Troubleshooting

This section helps you resolve problems you may encounter while setting up or using the projector.

Indicator Messages

Power Indicator

Indicator Condition

Projector Condition

Note

Off

Blinking light

Steady light

Green

Orange

Green

Orange

0.5 sec On,

0.5 sec Off

2.5 sec On,

0.5 sec Off

0.5 sec On,

0.5 sec Off

The main power is off

The projector is getting ready to turn on.

Off Timer is activated.

The projector is cooling down.

The projector is turned on.

The projector is in Standby.

–

Wait for a moment.

–

Wait for a moment.

–

Status Indicator

Indicator Condition

Projector Condition

Note

Off

Blinking light

Steady light

Red

Green

Orange

Green

1 cycle (0.5 sec On,

2.5 sec Off)

2 cycle (0.5 sec On,

0.5 sec Of)

3 cycle (0.5 sec On,

0.5 sec Off)

4 cycle (0.5 sec On,

0.5 sec Off)

6 cycle (0.5 sec On,

0.5 sec Off)

1 cycle(0.5 sec On,

2.5 sec Off)

Normal

Lamp cover error

Temperature error

Power error

Fan error

Lamp error

Re-firing the lamp

Network conflict

Control Panel Lock is on

The projector is in Standby.

–

Replace the lamp cover correctly.

(

→

page

105

)

The projector is overheated. Move

the projector to a cooler location.

Power unit will not work correctly.

Fans will not work correctly.

Lamp fails to light. Wait a full

minute and then turn on again.

The projector is re-firing.

Both the built-in LAN and the wireless

LAN cannot be connected to the same

network at the same time.

To use both built-in LAN and wireless

LAN at the same time, connect them to

different networks. (

→

page

)

You have pressed cabinet button

when Control Panel Lock is on.

(

→

page

)

–

Lamp Indicator

Indicator Condition

Projector Condition

Note

Off

Blinking light

Steady light

Normal

Lamp has reached its end of life. Lamp

replacement message will be displayed.

Lamp has been used beyond its limit. The

projector will not turn on until the lamp is

replaced.

Lamp is in Eco mode

Red

Green

–

Replace the lamp.

(

→

page

104

)

Replace the lamp.

(

→

page

104

)

–

Summary of Contents for MultiSync LT280






































































































































Search results

Summary of Contents for MultiSync LT280

Reviews:

Related manuals for MultiSync LT280

Brands by name

Popular brands

NEC MultiSync LT280, User Manual

Search results

Summary of Contents for MultiSync LT280

Reviews:

Related manuals for MultiSync LT280

Brands by name

Popular brands