58
6. Network control
❷
Enter through a Web browser
Connecting Your Computer
1) Start the computer's Web browser.
2) Enter the IP address on the projector set in the URL input field of the Web browser.
3) Enter the password in the [Password], then click [Login].
"* "the factory default setting is the user name: "admin" (administrator privileges), password: "admin".
4) Click the [Login]
NOTE:
• Users can click on the top right corner of the Web browser screen to select the display language.
• Do not start multiple Web browser settings or control. Do not use more than one computer set or control the projector.
• Please change your password.
• If the network does not appear on screen controls, please consult your network administrator.
• Please refresh the web page before operating the main body.
Description of each option
①
②
③
④
⑤
①
System status: Click this option to display the [System status] page.
②
General setup: Click this option to display the [General setup] page.
③
Picture setup: Click this option to display the [picture setup] page.
