56
5. Using On-Screen Menu
❾
Menu Descriptions & Functions [Info.]
Select info. function to detect the projected image signal and the projector operating status.
Press <HELP > button on the remote controller or <MENU> button on the control panel to display the OSD menu.
Press
button to select the info. menu, then press <ENTER> or button.
Info. display as follows:
Input......Display selected input source.
H- sync freq.......Display H- sync freq. of input signal in unit of KHz. Show “---KHz” when no signals are in existence.
V- sync freq.......Display V- sync freq. of input signal in unit of KHz. Show “---KHz” when no signals are in existence.
Lamp counter......Display the lamp's usage time.
Model name......Display the projector's model name.
S/N......Display the projector's serial number.
Firmware version......Display the projector's firmware version.
SUBCPU......Display the projector's SUBCPU.
Info.
Input
V-sync freq.
H-sync freq.
Lamp counter
Computer
...
31.50 kHZ
59.99 HZ
99.85%
30 H
Model name
S/N
Firmware version
SUBCPU
xxxxx
xxxxx
1.00.010
0.10
