89
9. Maintenance
5. Put the filter unit back to the projector cabinet.
Insert two catches of the tip of the filter unit into the groove of
the cabinet, and push the button to close the filter unit.
• Push the filter unit until it clicks into place.
This completes the filter replacement.
Go on to the clearing lamp and filter hour meters.
To clear the lamp usage hours and the filter usage hours:
1. Place the projector where you use it.
2. Plug the power cord into the wall outlet, and then turn on the projector.
3. Clear the lamp usage hours and the filter usage hours.
1) Press MENU button and the OSD displays. Press
button to select Expand menu, press button or ENTER.
2) Press
button to select "Lamp counter reset", press button or ENTER. The “Lamp counter reset?” mes-
sage displays. Select Yes to proceed.
Press button to select "Filter", press button or ENTER. Press
button to select “Filter counter reset”
and press ENTER. The “Filter counter reset”?” message displays. Select Yes to proceed.
：
Select
ENTER
：
Back
EXIT
：
Move
Filter counter reset?
Yes
No
：
Select
ENTER
：
Back
EXIT
：
Move
Lamp counter reset?
Yes
No
