English 37
USING THE PROJECTOR
Audio menu
Audio mute menu
Mute
Use this option to temporarily turn off the sound.
On
: Choose “On” to turn mute on.
Off
: Choose “Off” to turn mute off.
Note:
“Mute” function affects both internal and external speaker volume.
Audio volume menu
Volume
Adjust the volume level.
Setup menu
Setup projection menu
Projection
Select the preferred projection between front, rear, ceiling-top, and rear-top.
Setup screen type menu
Screen Type (for WXGA model only)
Choose the screen type from 16:9 and 16:10.
Setup power settings menu
Direct Power On
Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the “Power” key on the projector keypad or on the remote control.
Signal Power On
Choose “On” to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the “Power” key on the projector keypad or on the remote control.
Note:
Only supported on HDMI 1, HDMI 2, and VGA In connectors.
Auto Power Off (min.)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Power Mode (Standby)
Set the power mode setting.
Active
: Choose “Active” to return to normal standby.
Eco.
: Choose “Eco.” to save power dissipation further < 0.5W.
