NEC M166C, Customer Engineer Manual

Page: 11 / 56

Setting up a Template
© NEC Nederland B.V. 2015 Page 11 M166 CE Manaul
2 Setting up a Template
2.1 General
Before you start subscribing the M166, please configure the handset configurator with
required settings for the M166. This serves as a template. If you different groups of M166
users, needing different settings, you must repeat this procedure after subscribing a group
of handsets.
Note: This procedure is used for setting up a template. However, it also gives
information about settings, which can be used for making changes.
PROCEDURE: Setting up a template for the M166
Actions
1. Install the DECT Handset Configurator.
2. Start up your DECT Handset Configurator.
3. You will see the following screen:
4.
Click “
Other
”.
5. Now the DECT Handset Configurator window is opened. In the menu bar in the top
of the windows, go to
“
Tools
”  “
Options
” and then select
Interface
” 
Messaging . From now on, the DECT Handset Configurator communicates with the
M166 via the air interface, using “
Headset Connector
”