NEC M100 User Manual Download Page 62

Page: 62 / 459

Release 6.0

Chapter 2 Workflow - Installation to Operation

This chapter explains the flow of disk array unit from installation to operation.

Disk Array Unit Installation

Installation Preparation



Prepare the following:



Machines - Client machine to run the NEC Storage Manager client and the

application server.



Cables - LAN cable (shielded), interface cables (FC and/or iSCSI), and

power supply cable.



IP addresses, subnet masks, and gateway addresses for the disk array unit.



Network devices (as necessary).



Disk drives.



Tools and accessories like Phillips screwdriver and installation CDs.



Perform the preliminary setup of the application server.

See

Section 3.1: "Preparation"

Hardware Installation



Install disk array unit in the rack.



(

Optional

) Install disk enclosure in the rack.



Install disk drive.

See

Section 3.2: "Installation"

Cable Connections

Connect the following cables:



(

Optional

) SAS cable to connect disk array unit and disk enclosure.



FC cable to connect disk array unit and application server (for FC).



LAN cable or optical Ethernet cable to connect disk array unit and application

server (for iSCSI).



LAN cable to connect disk array unit, application server, and client.



(

Optional

) Power supply cable to connect disk enclosure to power supply.



Power supply cable to connect disk array unit to power supply.

See

Section 3.3: "Connection"

Summary of Contents for M100












































































































































































































































































































































































































































































Search results

Summary of Contents for M100

Reviews:

Related manuals for M100

Brands by name

Popular brands

NEC M100, User Manual

Search results

Summary of Contents for M100

Reviews:

Related manuals for M100

Brands by name

Popular brands