NEC M100 User Manual Download Page 329

Page: 329 / 459

Release 6.0

329

User Guide

Appendix C How to Set/Check Application Server (Windows) (iSCSI)

C.1.4 Setting up iSCSI Software Initiator

Settings for the Windows Server 2008 environment are described below.

1. Select the

General

tab in the iSCSI Initiator Properties screen to check the iqn (iSCSI Qualified

Name) shown as the Initiator name.

Figure C-12: iSCSI Initiator Properties (General Tab) Screen



Click the

Change

button to change the iqn.



Click the

Secret

button when using the mutual CHAP authentication.



Click the

Setup

button when using the IPSec tunnel mode function. This is not supported.



The

Secret

setting for mutual CHAP authentication must also be set for

the disk array unit. The setting method is described in

Section 15.3.21:

iSMcfg setldsetchap of NEC Storage Manager Command Reference



Mutual CHAP authentication is also described in

NEC Storage Manager

Command Reference

Bidirectional CHAP authentication

CHAP authentication is also described in

Appendix N: "Retrieve Initiator Information on

Application Servers Registered with iSNS Server"

Summary of Contents for M100












































































































































































































































































































































































































































































Search results

Summary of Contents for M100

Reviews:

NEC M100, User Manual, Page: 329 / 459

Search results

Summary of Contents for M100

Reviews: