45
... English
Appendices
Problem: Indicator lighting message
Power Indicator
Indicator Condition
Projector Condition
Note
Off
The main power is off
--
Blinking light
Blue
0.5 sec On,
0.5 sec Off
The projector is getting ready to turn on.
Wait for a moment.
2.5 sec On,
0.5 sec Off
Off Timer is enabled.
--
Steady light
Blue
The projector is turned on.
--
Red
The projector is in standby.
--
Status Indicator
Indicator Condition
Projector Condition
Note
Off
Normal
--
Blinking light
Red
1 cycle (0.5 sec
On, 0.5 sec Off)
light source error
Light source fails to light. Wait for a moment.
2 cycle (0.5 sec
On, 0.5 sec Off)
Temperature error
The projector is overheated. Move the projector to a
cooler location.
4 cycle (0.5 sec
On, 0.5 sec Off)
Fan error
Fans will not work correctly. Contact your dealer.
Steady light
Red
Control Panel Lock is enabled.
To disable Control Panel Lock, see page 34.
LED Indicator
Indicator Condition
Projector Condition
Note
Off
Normal
--
Blinking light
Red
LED light source fails to light.
Try to turn on the projector again. If the problem still
remains unsolved, contact your dealer.
