manualshive.com logo in svg

NEC ITK-8LCX, User Manual

Share
Download
NEC ITK-8LCX User Manual Download Page 39

 23 

1.

2

T

erminal

 S

etup

This chapter describes basic operating procedures for 

the terminal. Various terminal operations such as 

display, sounds, password and backup and restore are 

available.

Adjusting Volumes

    

Below is an example of the display when volumes are 

being adjusted.

Adjust Handset Receiver Volume

It is possible to adjust the volume level of 

handset receiver during a call in progress while 

using handset.
To adjust the volume, press the 

UP

 or 

DOWN

 

key while off-hook or during a call using the 

handset.

Adjust Speaker Volume

It is possible to adjust the volume level of speaker 

during a call in progress using speaker. To adjust the 

volume, press 

UP

 or 

DOWN

 key during speaker phone 

operation or during a call using the speaker.

You can only adjust the volume on the Call 
screen and Line screen.

When setting up the terminal, the softkey 
indicates the local softkey.

■

If the Back/Exit button is pressed while the 
Terminal Setting menu is displayed, the 
Favorite screen is displayed regardless of 
Home screen settings.

UP

DOWN

Summary of Contents for ITK-8LCX





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands