Chapter 3 MMI Configuration
15
Note:
Unless requested, Port Settings do not require modification.
Codec Settings
This function allows you to set Codec priorities and types. This VoIP phone supports the following Codecs: G.711 u-
law/G.711 A-law, G.729A. A maximum of three priority levels can be set in the SDP;
“First Priority”, “Second Priority” and
“Third Priority”.
RTP Packet Size
To enable/disable the RTP Packet Size:
1.
Press the
MENU/EXIT
key and select
SIP Settings
, then
RTP Pack Size
.
2.
Press the
SELECT
key to display the submenu.
3.
Use the
UP
and
DOWN
keys to choose G.711 Pkt Size / G.729A Pkt Size. Press the
SELECT
key to set more
detail settings.
Note:
These configurations need to use the same setting as SV systems
RFC2833 Payload
Enter the RFC2833 payload number, default: 101.
Save
Select this option to save settings.
S
S
I
I
P
P
A
A
c
c
c
c
o
o
u
u
n
n
t
t
A maximum of ten SIP accounts can be configured with different SIP proxy settings. You will be able to make calls only after
your SIP account is activated.
To configure a SIP account setting from the phone,
For SV8500
1.
Select one of the ten SIP accounts to display the submenu. The following items are required:
Registration:
Enable / disable this account, set to
“Enable” on SV8500.
Send Register:
Enable / disable sending SIP account information, set to
“Enable” on SV8500.
Reg. ID:
Input the registration ID, it is
“Extension number” registered on SV8500.
Display Name:
Input the user name. The user name will be shown on the terminal display when the phone is
idle.
Auth. Name:
Input the Authentication Name used for authentication. It can be identical to or different from SIP
Registration ID. It is
“Extension number” registered on SV8500
Password:
Input the register password.
Reg. Server:
Input the registration server IP address,
“(IP Address of SV8500): (port number)”, a port number
is required. The default value of the SV8500 is
“5060”
Reg. Port:
Input the registration server Port.
Proxy Server:
Input the proxy server IP address.
Proxy Port:
Input the proxy server port number.
Outbound Proxy:
Input the outbound proxy server IP address.
Outbound Proxy Port:
Input the outbound proxy server port number.
Expire time:
User can set the timeout duration for registration request, it should be
“120” or more.
DTMF Type
: Input the DTMF type options: RFC2833 / SIP INFO / In-Band,
“SIP INFO” is recommended on
SV8500
Keep Alive
: To keep connected to the server by period time.
Typically enabled to instruct the phone to send
SIP keep-alive message for maintaining a “pinhole” in the user’s firewall through which SIP messages can pass.
MWI
: Enable / disable to ask server auto provide Message Waiting Indicator.
Voice Mail:
Input the speed dial number for your SIP reg. server or IP-PBX Voice Mail system.
Save:
To save your settings.
