4. Names and Functions of Parts
Express5800/GT110d-S User’s Guide
32
Chapter 1 General Description
2.5-inch Hard Disk Drive model
(1) Air
duct
To take air to cool the server
(2) POWER
switch
The switch to turn the server on and off. Press once to turn
on the server. The Power LED lights green when it is on.
Press it again to turn off the server. Hold down the switch
for 4 seconds or more to forcibly turn off, the server.
(3) Power LED (green/amber)
This LED lights green when the power is ON.
(4) Disk access LED (green/amber)
This LED lights or flashes green when the internal Hard
Disk Drive is being accessed. It lights amber when the drive
is broken and flashes amber and green alternately when
the array disk is being rebuilt.
(5) Status
LED
(green/amber)
This LED indicates the server status. It lights green when
the server is operating normally and lights or flashes amber
when errors occur.
(6) Front USB connectors
These connectors are used to connect devices that support
the USB interface.
(7) Front
bezel
This cover protects the front part of the server.
(8) Stabilizer
To mount the server vertically, install as shown in the image
(9) Release tabs (3 at side of front bezel)
Tabs to unlock the front bezel. Pull up to disengage the
front bezel.
(10) Optical disk drive
Reads data from (or writes data to) the disk.
The drive provides the following: an eject button to eject the
tray; an LED that indicates Hard Disk Drive access; and an
eject hole for forcibly ejecting the tray.
(11) 3.5-inch device bay
The bay which can accommodate 3.5-inch device or extra
HDD cage.
(12) Security key
Locks the door of 2.5-inch Hard Disk Drive bays
(13) 2.5-inch Hard Disk Drive bay door
Open this door to handle 2.5-inch Hard Disk Drives. This
door can be locked with the security key.
(4)
(13)
(10)
(9)
(11)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(12)