NEC ELECTRA ELITE IPK II, Programming Manual, Page: 307 / 617

Document Revision 1 Electra Elite IPK II
2 - 272 Program 25 : DID/DISA Setup
Description
Use Program 25-07 : System Timers for VRS/DISA to set the value for the system
timers which affect DID and DISA. Refer to the following chart for a description of
each option, its range and default setting.
Program 25 : DID/DISA Setup
25-07 : System Timers for VRS/DISA
Level:
IN
Input Data
Item
No.
Item
Input
Data
Default
Related
Program
01 VRS/DISA Dial Tone Time
After answering a DISA trunk, the system waits this
interval for the caller to dial the first digit of the DISA
password. If the caller fails to dial within this interval, the
system drops the call.
0~64800
(sec)
10 25-04
02 VRS/DISA No Answer Time
A VRS/DISA caller can ring an extension for this interval
before the system sets the call as a Ring No Answer.
After this interval expires, the call follows the
programmed Ring No Answer routing (set in Program
25-03 and 25-04).
0~64800
(sec)
0 25-04
03
Disconnect after VRS/DISA re-transfer to IRG
0~64800
(sec)
60
04 Calling Time to Automatic Answering Telephone Set
Set the answering waiting time of the automatic
answering extension when an incoming DID trunk call is
received.
0~64800
(sec)
10
05 Duration Time for Guidance Message by Automatic
Answering Telephone Set
Set the announcement time of the automatic answering
extension after which in incoming DID trunk caller is
disconnected.
0~64800
(sec)
10
06 Duration Time for Guidance Message by ACI
Set the announcement time by the ACI after which an
incoming DID trunk caller is disconnected.
0~64800
(sec)
10
07 Long Conversation Warning Tone Time
Determine the length of time a DISA caller or any trunk-
to-trunk (such as Tandem Trunking) conversation can
talk before the Long Conversation tone is heard.
0~64800
(sec)
3600 14-01-25
20-28-01
20-28-02
20-28-03