NEC ELECTRA ELITE IPK II, Programming Manual, Page: 305 / 617

Document Revision 1 Electra Elite IPK II
2 - 270 Program 25 : DID/DISA Setup
Description
Use Program 25-06 : VRS/DISA One-Digit Code Attendant Setup to set up single
digit dialing through the VRS. This gives VRS callers single key access to extensions,
the company operator, Department Calling Groups and Voice Mail. For each VRS
message set to answer outside calls (refer to Program 25-04 and 25-05), you specify:
J The digit the VRS caller dials (0-9,
,
, #). (Keep in mind that if you assign
destinations to digits, outside callers will not be able to dial system extensions.
J The destination reached (eight digits max.) when the caller dials the specified digit.
The destination can be an extension, a Department Calling pilot number or the Voice
Mail master number. A one-digit code can be assigned for each Automated Attendant
message.
Example:
Message Number=01, Destination=2, Next Message Number=0, Dial=399
In this example, when “2” is dialed by an outside caller, the system transfers the call to
“399”. This means that extension 200~299 cannot receive calls from VRS/DISA users
during/after VRS Message 01.
Program 25 : DID/DISA Setup
25-06 : VRS/DISA One-Digit Code Attendant Setup
Level:
IN
Input Data
Attendant Message Number 01~48
Received Dial 1-9,0,
,
,#
Item
No.
Item Input Data Default
01
Next Attendant Message
Number
0-48 (0 = No Setting) 0
02 Destination Number Up to 8 digits No Setting