NEC ELECTRA ELITE IPK II, Programming Manual, Page: 278 / 617

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 243
Description
For each DID Translation Table, use
Program 22-12 : DID Intercept Ring Group
to
define the first destination group for DID calls.
Depending on the entry in Program 22-09-02 and 22-11-04, the incoming calls will
route to the first destination group by the following:
J
Vacant number intercept (vacant number means that there is no phone connected,
no station card installed, or the extension number is not defined in Program 11-02)
J
Busy intercept
J Ring-no-answer intercept
If the destination is '0', the calls will be forwarded to the trunk ring group defined in
Program 22-11 based on the table assigned to the DID trunk.
If Program 22-11-05 and 22-11-06 are set, the priority of transferring will be in this order:
Program 22-11-05
+
Program 22-11-06
+
Program 22-12.
For busy and no-answer calls, if the first and third destinations are programmed but the
second destination is not, the incoming call goes to the third destination after the first
destination. If the first and second destinations are not defined, but the third destination
is, the call goes directly to the third destination (as defined in Program 22-12).
Program 22 : Incoming Call Setup
22-12 : DID Intercept Ring Group
Level:
IN
Conversion Table Area Number 01~20
Item
No.
Day/Night
Mode
Incoming Group Number Default
01 1~8 0 (No Setting)
1~8 or 1~100 (Incoming Group)
101 (DSPII-U10 Voice Mail)
102 (In-Skin/External Voice Mail)
103 (Centralized Voice Mail)
1