NEC ELECTRA ELITE IPK II, Pc Programming Manual

Page: 37 / 85

Document Revision 1 Electra Elite IPK II
26 Standard View
9.0
I
NCOMING
R
ING
G
ROUPS
This screen combines system data relevant to the KTS feature “Incoming Ring
Groups”. To setup up an Incoming Ring Group complete the following:
1. For each trunk, specify which Incoming Ring Group it will be a member of.
Alternatively, route the call from the trunk to a voice mail type. Individual
settings can be applied to each Night Mode.
2. Select a particular Incoming Ring Group.
3. Select which extensions are members of the Incoming Ring Group.
Trunks
List all the trunks in the system and indicates which Incoming Ring Group or voice
mail type the trunk is member of. These settings are linked with 22-05.
Extensions
Lists which extensions are members of the Incoming Ring Group. These settings
are linked with 22-04.
Figure 16 Standard View - Incoming Ring Groups