Electra Elite IPK II
Document Revision 1
Standard View
15
1.
Specify a Class of Service to modify.
2.
Enable/Disable options for the class.
3.
Select a Night Mode.
4.
Select which DISA Users use this class during the selected Night Mode.
5.
Select which Tie Lines use this class during the selected Night Mode.
Class of Service Options
Enable/Disable service options for the class. These settings are linked with 20-14.
Night Mode
Assign when DISA Users and E&M Tie Lines are class members via this Night
Mode selection. Do this by completing the following:
1.
Select a Night Mode.
2.
Select which DISA Users and E&M Tie Lines, during this Night Mode, are
class members.
DISA Users
Lists which DISA Users are members of the class during the selected Night Mode.
These settings are linked with 25-09.
E&M Tie Lines
Lists which E&M Tie Lines are members of the class during the selected Night
Mode. These settings are linked with 34-02.
5.0
C
LASS
OF
S
ERVICE
FOR
T
ELEPHONES
This screen combines system data relevant to Class of Service Options for
telephones. To setup a Class of Service and associate it with members complete
the following:
Summary of Contents for ELECTRA ELITE IPK II
