NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 61 / 996

Electra Elite IPK II Document Revision 1
Ancillary Device Connection 2 - 39
Ancillary Device Connection
Description
Ancillary Device Connection allows installation of selected peripheral (ancillary) devices to a multiline
terminal. This feature enhances peripheral device objectives.
An Electra Elite IPK II multiline terminal user can accomplish this by using the AP(R)-R Unit (Analog Port
Adapter with Ringer) or AP(A)-A Unit (Analog Port Adapter without Ringer) for analog telephone devices,
or installing the AD(A)-R Unit to connect devices such as tape recorders.
The AP(A)-R/AP(R)-R Unit is the interface for installing a single line telephone, Modem, credit card
reader, wireless headset, NEC Conference Max Conferencing unit or other compatible analog device.
System Availability
Terminals
DTH-8-1, DTH-8D-1, DTH-16D-1, DTH-32D-1, DTH 16LD-1
Required Component(s)
AD(A)-R, AP(A)-R, AP(R)-R
Conditions
The optional device fits underneath the terminal.
Engineering Technical Information Bulletins (ETIs) provide connection instructions for the
various ancillary devices. Ancillary devices that are not covered by an ETI may not be
compatible with Electra Elite multiline terminals. Verify with NEC Unified Solutions, Inc.,
National Technical Assistance Center (NTAC) before attempting hookup.
Individual device conditions and operating procedures are provided in the applicable ETI
Bulletin and ancillary device manufacturer information.
A single line telephone connected to an APR-U/AP(R)-R Unit or APA-U/AP(A)-R Unit
cannot perform Trunk-to-Trunk Transfer and does not support a 1 terminal - 2 outside
parties conference call.
A single line telephone connected to an APR-U/AP(R)-R Unit or APA-U/AP(A)-R Unit does
not support Message Waiting Indication or Caller ID Indication.