NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 449 / 996

Electra Elite IPK II Document Revision 1
Handsfree and Monitor 2 - 427
Handsfree and Monitor
Description
Handsfree allows a Multiline Terminal user to process calls using the speaker and microphone in the
telephone instead of the handset. Handsfree is a convenience for workers who do not have a free hand
to pick up the handset. For example, a terminal operator could continue to enter data with both hands
while talking on the telephone.
There are three variations of Handsfree.
J
Handsfree
The user can place and answer calls by pressing the Speaker key instead of using the handset.
J
Automatic Handsfree
The user can press a trunk line key or virtual extension key without first lifting the handset or
pressing the Speaker key. An extension can have Automatic Handsfree for just outgoing calls or
both outgoing calls and incoming calls.
J
Monitor
User can place a call without lifting the handset, but must lift the handset to speak.
Conditions
Handsfree and Monitor are not available for single line telephones.
Prime Line Selection affects how incoming and outgoing calls are handled and thus
determines what happens when the user presses the speaker key.
Monitoring volume may be adjusted using the volume control on the Multiline Terminal.
When a Multiline Terminal user lifts the handset, the monitoring condition is automatically
released, and the Speaker LED goes off.
A Multiline Terminal is considered off-hook by the system when this feature is used.
Default Setting
Enabled