NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 24 / 996

Document Revision 1 Electra Elite IPK II
2 - 2 Features
S
ECTION
2
I
MPORTANT
N
OTES
Simplifying Multiline Terminal Operation with One-Touch Keys...
A multiline terminal user can access many features through Service Codes (e.g.,
Service Code 629 leaves a Message Waiting for a co-worker). To streamline the
operation of their telephone, a multiline terminal user can store these codes under
One-Touch Keys. This provides one-button operation for almost any feature. To find
out more, turn to the One-Touch Calling and One-Touch Serial Operation features.
Programmable Keys
When reading an instruction using programmable keys, you will see a notation similar
to (PGM 15-07 or SC nnn). This means that the key requires function code nnn, and
you can program this code through Program 15-07 or by dialing Service Code 751 or
752. Refer to the Programmable Function Keys feature for more information.
Using Handsfree
The manual assumes each extension has Automatic Handsfree. This lets a user just
press a line key or Speaker key to answer or place a call. For extensions without
Automatic Handsfree, the user must:
Lift the handset or press Speaker for Intercom dial tone.
Lift the handset or press Speaker, then press a line key for trunk dial tone.
Port Assignments
Port Calculation for Trunks:
The system detects the type of ETU (trunk or extension) and assigns the required
extension or trunk ports to the slot. The system will use the next available port
numbers - it will not reserve any ports.