NEC E988, User Manual, Page: 18 / 83

English - 15
Mounting (for Trained Installers)
Carefully inspect the location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight of
the monitor.
The weight of this monitor is provided in the specifications (see "E988" on page 64 ).
The product warranty does not cover damage caused by improper installation, re-modeling, or natural disasters.
Failure to comply with these recommendations could result in voiding the warranty.
To ensure safe installation, use two or more brackets to mount the unit. Mount the unit to at least two points on the installation
location.
Allow for adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away from the
monitor and from the mounting equipment.
Mounting bracket
Please note the following when mounting on a wall or ceiling:
• We recommend mounting interfaces that comply with UL1678 standard in North
America.
• For detailed information, refer to the instructions included with the mounting
equipment.
We strongly recommend using the screws as shown below.
If using screws longer than specified below, check the specifications for the
depth of the bracket hole.
Screw Size Bracket Hole No Thread
Recommended Fasten Force
(A) (B) (C) (D)
M8 (4 pcs) 16-18 mm ≤ Ø 12 mm 6 mm 950-1600 N•cm
NOTEE:
When used in a video wall configuration for a long time, a slight expansion of the monitors may happen due to
temperature changes. It is recommended that a gap of over one millimeter is kept between adjacent monitor
edges.
> 1.0 mm
Screw (A)
Monitor
Diameter (C)
Gap
Washers
Mounting
bracket
No thread (D)
Thickness of
the bracket
and washers
(B)