NEC E328 Page 83 User Manual Download

Page: 83 / 90

English - 80

Setup
Other settings

Input Labels

Renames the input terminal currently being displayed. Letters (A-Z), numbers (0-9), and some

symbols can be used.

Key Lock Settings

Prevents the monitor from being controlled using the buttons on the monitor control panel.

OffN: All buttons operate normally.

Mode 1N: Only the power button and the input switching function operate.

Mode 2N: All buttons are locked. (Only the power button can be used during standby mode.)

IR Lock Settings

Prevents the monitor from being controlled using the remote control.

OffN: All buttons operate normally.

Mode 1N: Only the POWER and the SOURCE buttons operate.

Mode 2N: All buttons are locked. (Only the power button can be used during standby mode.)

Power supply

You can configure the power supply to the USB Type-C port.

The power consumption increases when set to [On].

LED Indicator

Set it to Off to turn off the power indicator when the monitor is turned on (normally lit blue).

Mute Settings

You can change the effect of the MUTE button of the remote control.

AudioN: Mutes only the audio files.

VideoN: Mutes only the video files.

Audio & VideoN: Mutes the audio and the video files.

Thermal Management

The monitor is equipped with thermal sensors and displays a warning when the ambient

temperature exceeds the operation guaranteed temperature. If a warning is displayed, turn the

monitor off since using the monitor in such environment may cause a malfunction.

arning MessageN: A temperature warning is displayed on the screen when the internal

temperature has exceeded the operation guaranteed temperature.

ShutdownN: The monitor turns off automatically when the internal temperature has

exceeded the operation guaranteed temperature.

Signal Information

Displays the information regarding the input signal.

Monitor Information

Displays the information regarding the monitor.

Factory Reset

All settings except network are returned to factory default.

Summary of Contents for E328



























































































Search results

Summary of Contents for E328

Reviews:

Related manuals for E328

Brands by name

Popular brands

NEC E328, User Manual

Search results

Summary of Contents for E328

Reviews:

Related manuals for E328

Brands by name

Popular brands