manualshive.com logo in svg

NEC DTL-12BT-1 series, User Manual, Page: 29 / 59

Share
Download
NEC DTL-12BT-1 series User Manual Download Page 29

1 - 17

Operating Instructions and Maintenance

Keep the charging terminals of the Bluetooth

®

cradle and Bluetooth

®

 handset always clean. Wipe

dust off the charging terminals with a dry cotton
swab at least once a month or rub them with a
cotton swab moistened with alcohol.

Because cordless terminals use radio transmission between their Bluetooth

®

 terminal and

Bluetooth

®

 handset, they may take about 15 seconds after the line cord is installed into the

Bluetooth

®

 cradle before calls can be made between the Bluetooth

®

 cradle and Bluetooth

®

handset.
If the Bluetooth

®

 handset goes off- hook or the Conference or Talk key is pressed in the

meantime, the error tone “pi-pi-pi-pi” may sound without a wireless (line) connection being
established.

Charging Terminals

In cleaning the charging terminals, be sure not to:

• Touch the terminals with hands directly
• Short-circuit the terminals.

Operation Following Power Feeding to the Bluetooth

®

Terminal

Charging
terminals

Caution

Summary of Contents for DTL-12BT-1 series




























































Reviews:

No comments