manualshive.com logo in svg

NEC DT930 Series, User Manual, Page: 103 / 186

Share
Download
NEC DT930 Series User Manual Download Page 103

 89 

1.

5.

T

ERMINAL 

S

ETUP – 

P

ORTAL

Terminal Setup  

Adjusting Volume   

Display example for adjusting volume levels.
   

To Adjust Handset Receiver Volume

The volume level of the handset receiver can be 
adjusted during a call in progress using handset.

Press the Up /Down key in the Offhook status or during 
a call when using the handset.

To Adjust Speaker Volume

The volume level of the speaker can be adjusted during 
a call in progress using speaker.

Press the Up /Down key during speakerphone 
operation or during a call using the speaker.

To Adjust Ringer Tone

The volume level of the ringer tone can be adjusted 
during an incoming call arrival.

Press the Up /Down key during ringing.

Setup With Feature Key

Microphone On/Off

(1) LED on 

 shows the status of the built-in 

microphone.

(2)

Press the MIC key or press 

 and 

.

While you set up the terminal, the “soft key” 
means local soft key.

Adjusting volume is available on the call screen 
only.

■

If the Back/Exit button is pressed while the 
Terminal Setting menu is displayed, the Favorite 
screen is displayed regardless of Home screen 
settings.

Mic

Feature

1

Summary of Contents for DT930 Series



























































































































































































Reviews:

No comments