FEATURE OPERATION
79
TO ANSWER
1.
Press Answer key.
Call in progress is placed on hold.
A hold tone is not transmitted to the other
party of the original call.
Calling terminal and called terminal can
privately speak.
Answer key lamp lights red.
2.
Press Answer key.
Answer key lamp goes off.
Return to original call.
SYSTEM CLOCK SETUP BY
STATION DIALING
This feature enables a terminal user to adjust the
system clock.
The feature access code/feature key is
set by system data setting at initial
installation. For details, please contact
the system administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
2.
Dial System Clock Setup access code or press
System Clock Setup feature key.
You will receive a feature dial tone.
3.
Dial new time in 24 hr. format using 6 digits
(HHMMSS).
You will receive a service set tone.
4.
Press Speaker key.
Speaker key lamp goes off.
DAY/NIGHT MODE CHANGE BY
STATION DIALING
This feature allows selected terminals to activate a
change from day mode to night mode by dialing a
special code.
The feature access code/feature key is
set by system data setting at initial
installation. For details, please contact
the system administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
2.
Dial Day/Night Mode Change access code or
press Day/Night Mode Change feature key.
3.
Press “1” –“4” and set in various mode.
Press 1 for DAY mode.
Press 2 for NIGHT mode.
Press 3 for MODE-A mode.
Press 4 for MODE-B mode.
4.
Press Speaker key.
Speaker key lamp goes off.
If a programmable key is used lamp
indication will be,
Night Mode = Red lamp on
Mode-A = Red lamp flashing
(60 ipm)
Mode-B = Red lamp flashing
(120 ipm)
