FEATURE OPERATION
75
AUTOMATIC INTERCOM
Automatic Intercom provides a path for voice
announcement calls between two terminals using a
Line key. Private conversations can be held. The
Busy/Idle status of the associated the terminal is
displayed on the Automatic Intercom feature key
LED.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
TO INITIATE
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
2.
Press Automatic Intercom feature key.
The called terminal receives a tone burst.
TO ANSWER
1.
While hearing ringing tone,
Automatic Intercom feature key lamp flashes
green.
Voice Call alert tone is heard.
2.
Press Automatic Intercom feature key.
Automatic Intercom feature key lamp lights
green.
3.
Press Speaker key.
Speaker key lamp lights red.
MANUAL INTERCOM
The Manual Intercom groups have up to six
terminals sharing a common signal path. Users can
call other members of the Manual Intercom group
by pressing a Manual Intercom feature key; each
press sends a tone burst over the speakers of all
the terminals in the group. When another user
answers the call a speech path is activated.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
TO INITIATE
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
→
2.
Press Manual Intercom feature key.
You will receive a ringback tone.
3.
Each press of Manual Intercom feature key sends
tone bursts.
TO ANSWER
1.
While hearing ringing tone,
Manual Intercom feature key lamp flashes
green.
You may receive a ring tone.
2.
Press Manual Intercom feature key.
Manual Intercom feature key lamp lights
green.
3.
Press Speaker key.
Speaker key lamp lights red.
4.
If called terminal is engaged in a non-intercom
call, the terminal may press Manual Intercom
feature key after placing original caller on hold
(with Hold key).